Features
Operation
The Maelstrom X10 features a simple, two-mode interface that takes
only a few seconds to master. To start, please make sure the X10
battery is inserted with the positive side (+) toward the head. Then,
tighten the tailcap fully down and the X10 will turn on. Loosen the
tailcap a half-turn, and the X10 will turn off.
The X10 tailcap has a pressure-style switch. When the tailcap is
loosened a half-turn, simply press the button on the back to activate
the light. The switching mechanism is momentary, which means when you
stop pressing on the button, the X10 will turn off. To 'lock' the X10
on, simply tighten the tailcap fully down again.
To switch between the high and low output modes, turn the X10 off,
and then turn it on again within 1 second. Anytime the X10 is turned on
within 1 seconds of being turned off, it will automatically switch to
the next mode. However, if you leave the X10 off for 2 seconds or
longer, it will "memorize" the last mode used. See the examples below:
Example 1: ON (High mode) --- OFF (1 Second) --- ON (Low Mode)
Example 2: ON (High mode) --- OFF (2 Seconds) --- ON (High mode)
|
Deal of the Day
