 |
 |
 |
|
The EDC-T1B-120 flashlight is a superior next generation single button multi-brightness everyday carry LED flashlight for the sophisticated flashlight user. You can directly and instantly access the light you need - from a medium brightness for most tasks that provides exceptionally long run times, to a blinding tactical brightness for emergencies, to an extreme low brightness for preserving night vision. You can customize each brightness setting and other features to fit your particular needs. And the light is so small you can carry it with you wherever you go.
- Input voltage: 1.8V to 4.5V
- Battery:
CR123 primary cell (Li-MnO2, 3.2V), RCR123 rechargeable cell with
safety protection circuit (Li-ion - Li-CoO2/Li-MnO2, 4.2V)
- Light Source: high efficiency white LED
- Maximum Light Output: 100, 120, 140 or 170 lumens depending on model
- Runtimes: 1.25 hour typical runtime on High setting, greater than 2 hours to drop below 50% output.
- Power supply: constant power with thermal regulation
- Lens: nearly unbreakable ultra-clear glass with anti-reflective coatings
- Housing: aerospace aluminum, black military Type III hard anodize, stainless steel bezel
- Pocket clip, deep carry bezel up, MOLLE compatible, retaining.
- Water resistance: 2 atmospheres (20m or 66 feet of water) - static.
- Dimensions: Ø 25.4mm x 95mm (Ø 1" x 3.75") flush button, Ø 25.4mm x 98mm (Ø 1" x 3.85") raised button
- Weight: 100g (3.5oz).
|
|
|
 |
|
 |
|
|
|
 |
|
 |
|
Features
- 4 preset brightness settings: maximum output, 35, 12 and 0.3 lumens. The brightness settings and the turn-on setting may be customized for special missions.
- 1.25
hour typical runtime on High setting from a single CR123 battery,
greater than 2 hours to drop below 50% output. Higher output models
are more efficient.
- Elegant single button interface has proven to be simple and very popular.
- Sealed gold-plated switch for maximum reliability.
- Constant brightness through constant power regulation.
- Graceful low battery warning.
- Designed for both regular lithium batteries and rechargeable Li-ion batteries. Protects rechargeable batteries from over-discharge.
- Full thermal management.
- Potted electronics for the ultimate in reliability under extreme conditions.
- Anti-damage battery compartment protects battery under extreme conditions.
- Nearly unbreakable ultra clear glass lens with anti-reflective coatings.
- Stout ACME threads used throughout.
- Aerospace aluminum protected with black military Type 3 hard anodize. Stainless steel crenelated bezel.
- Customizations
include selectable turn-on preset, momentary operation, automatic
shut-off, button lock, locator flash, burst control. Output settings
can include burst output, tactical strobe, emergency strobe signaling
and emergency SOS signaling or any brightness level.
- Reverse battery polarity protection without diode power penalty.
- Pocket clip, bezel down carry, black.
- Water resistance: 2 atmospheres (20m or 66 feet of water) - static.
- Dimensions: Ø 25.4mm x 95mm (Ø 1" x 3.75").
- Weight: 100g (3.5oz) including battery.
|
|
|
|
|
|
|
Specials
