These are "textured" reflectors for our very popular Maelstrom G5 tactical flashlight. These textured reflectors will soften the hotspot, providing you with better peripheral lighting while sacrificing minimal distance, or "throw." What's more, these reflectors are a cinch to install - they swap right out and drop right in!

Reflector Installation

• 1. Get a mouse pad or towel to help get the bezel off. Press the front of the light (bezel) against the mouse pad and rotate counter-clockwise to remove the bezel.
• 2. Gently tap the head on a solid surface to pop out the glass window. Be sure to note which side is inside and which side is outside. You can set it on top of the bezel the same way it came out. Be sure to handle it by the edges so you don't have to wipe down the window afterward because of fingerprints.
• 3. Get a toothpick or something not sharp (don't use a knife) and carefully remove the o-ring from around the reflector. Be sure not to touch the o-ring too much as it has some light lubricant. Don't set it on top of your lens.
• 4. The reflector should now drop right out of the light. Do not touch the surface of the reflector as any contact will permanently affect the reflector surface.
• 5. Drop-in your replacement reflector and reverse the process to put it back together and you're done! Store your smoother reflector in a clean, dry dust free environment - ziplock bags are great!